Director Importers and Suppliers for Burma Teak, Pine Wood & Hard Wood

Treated Size

Sawn softwood pressure treated to enhance resistance to rot and insect attack. Not suitable for use in direct ground contact. Wood naturally expands and contracts with moisture content so some changes in size should be expected.

Treated Size

All sizes are approximate and will vary with moisture content. Wood is a natural material and the colour will change with age. If it is wet, it will typically darken. Always seal cut ends with a suitable preservative to maintain all-round protection.

Treated Size

Some of available size

  • 19 x 100mm x 2.4m
  • 19 x 38mm x 1.8m
  • 19 x 32mm x 2.4m
  • 47 x 47mm x 2.4m
  • 25 x 38mm x 2.4m
  • 25 x 47mm x 2.4m
Treated Size

For use in above ground contact. It is used for residential, commercial and industrial applications. Easily painted and stained. High quality oil and latex based points are recommended. Hot-dipped galvanized or stainless steel fasteners and fittings are acceptable for use with Alkaline Copper Quaternary treated wood.

Trated Size